DS18B20 1-Wire Temperature Sensor Unit

RM3.00

This is a digital temperature sensor unit you can use with Arduino to sense temperature where this sensor is touching.

 

10 in stock

SKU: SNR-DS18B20-CHIP Category: Tags: , ,

Description

The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with non-volatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. In addition, the DS18B20 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply.

Note : You’ll need a pull-up resistor of 4.7K or 10K between the OUT and VCC pins in order for this sensor unit to function properly.

Features

  • 1-wire communication
  • Operating voltage : 3 – 5V
  • Operating current : 1.5mA (active)
  • Measuring temperature : -55 to +125ºC
  • ±0.5°C Accuracy from -10°C to +85°C
  • Programmable Resolution from 9 Bits to 12 Bits
  • Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)

 

Wiring

Label Meaning Connection
VCC Power source Connect to 3 – 5V of system
OUT Output data Connect to any digital pin, use 4.7K pull-up resistor to VCC for stable operations.
GND Ground Connect to GND of system

Files & Documentation

Additional information

Weight 1 g
Dimensions 8 × 5 × 5 mm

Reviews

There are no reviews yet.

Be the first to review “DS18B20 1-Wire Temperature Sensor Unit”

Your email address will not be published. Required fields are marked *