GP2Y1010AU0F PM2.5 Dust Particle Sensor Module

RM24.90

This is a dust particle sensor that you can use with Arduino to sense the level of dust of a designated surrounding.

Item included

  • 1 x SHARP GP2Y1010AU0F PM2.5 Dust Particle Sensor Module
  • 1 x Jumper cable 6P
  • 1 x Resistor 150Ω
  • 1 x Electrolytic capacitor 220uF

 

3 in stock

SKU: SNR-GP2Y1010AU0F Category: Tags: , ,

Description

This is a dust particle sensor by SHARP that you can use with Arduino to sense the level of dust of a designated surrounding.

GP2Y1010AU0F is a dust sensor by optical sensing system. An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device. It detects the reflected light of dust in air. Especially, it is effective to detect very fine particle like the cigarette smoke. In addition it can distinguish smoke from house dust by pulse pattern of output voltage.

Features

  • Operating voltage : 3 – 5V
  • Operating current : < 20mA
  • Operating temperature : -10 to +65ºC
  • Compact, thin package (46.0 × 30.0 × 17.6 mm)
  • Low consumption current (Icc: MAX. 20 mA)
  • The presence of dust can be detected by the photometry of only one pulse
  • Enable to distinguish smoke from house dust
  • Lead-free and RoHS directive compliant

 

Wiring

Label Meaning Connection
V-LED Optical Dust Sensor LED power source Connect to 3 – 5V of system with 150Ω resistor in series, and 220uF capacitor in parallel
LED-GND Optical Dust Sensor LED ground Connect to GND
LED Optical Dust Sensor LED enable Connect to any digital pin for enable optical dust sensor
S-GND System Ground Connect to GND
VO Analog Output Connect to Analog input pin
VCC Amplifier power source Connect to 3 – 5V of system

Files & Documentation

Additional information

Weight 10 g
Dimensions 46 × 30 × 18 mm

Reviews

There are no reviews yet.

Be the first to review “GP2Y1010AU0F PM2.5 Dust Particle Sensor Module”

Your email address will not be published. Required fields are marked *