LM35 Analog Temperature Sensor Unit
This is the easiest type of contacting temperature sensor you can directly use with an Arduino without the need of adding external components.
50 in stock
This is the easiest type of contacting temperature sensor you can directly use with any controller with analog reading capability or ADC such as Arduino without the need of adding external components.
The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device makes interfacing to readout or control circuitry especially easy.
- Calibrated Directly in Celsius (Centigrade)
- Linear 10mV/°C Scale Factor
- Sensing temperature range : −55 to +150°C
- Operating voltage : 4 – 30 V
- Less Than 60-μA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
Files & Documentation
|Dimensions||18 × 5 × 5 mm|