FT232RL Serial Programmer Interface Module
RM9.90
6 in stock
Description
FTDI?s FT232 is popular USB to serial UART interfacing chip. Generally it is used to interface Microcontroller Development Boards (e.g. 8051, AVR, Arduino etc) to computer. It can also be used to upload sketch in Arduino Boards such as Arduino Pro Mini, Lilypad or ESP8266 based development boards which does not have built-in serial interface chip on it.
Note : Make sure the power source choice (either 3.3V or 5V) is selected properly using a header pin jumper cap before connecting this module to your target device.
Wiring
Normally you would only need to connect these pins to interface with boards.
| Pin Label | Connection | Meaning |
| DTR | RST / RESET | Data Terminal Ready |
| RX | TX of targeted device | Receiver pin of FT232RL chip |
| TX | RX of targeted device | Transmitter pin of FT232RL chip |
| VCC | 3V or 5V | Power source from the module |
| CTS | GND | Clear-To-Send |
| GND | GND | Power ground |
Files & Information
Additional information
| Weight | 5 g |
|---|
