EUREKA3D Filament PLA+ 1KG 1.75mm (Fluorescent Yellow)

RM59.00 RM45.00

This is our brand of filament for FDM 3D printers, brought to you by Einstronic!


13 in stock

SKU: 3DF-PLA1KG-FY Category: Tags: ,


This is our own brand of FDM 3D filaments Eureka3D, brought to you by us Einstronic!

Note : This is PLA+ filament. It requires higher printing temperature to work beautifully, we have tested it and find the optimum print temp at 220ºC, speeds and bed temp setting are the same as regular PLA. The material properties advantages of PLA+ over the regular PLA are

  • Less hygroscopic (not easy to absorb humidity)
  • Less brittle
  • Almost no stringing
  • Better flexibility
  • Better surface quality
  • Better strength and durability
  • Better resistance against pressure
  • Higher glass transition temperature


You can expect good print results from our filaments because we are constantly monitoring the quality of filaments from time to time. You can follow our setting values to get optimal results without hassle of tuning your settings!


Print Temp 215 – 230ºC
Bed Temp 60ºC
Retraction 6mm @ 40mm/s
Print Speed 50 – 80 mm/s
Wall Speed 30 – 40 mm/s
Print Acceleration 800 mm/s²
Travel Acceleration 2000 mm/s²
Print Jerk 6 mm/s
Travel Avoid 1 mm
Z-Hop Height 0.4 mm
Cooling Rate 80 – 100%
Minimum Layer Time 10 s
Filament Diameter 1.75 mm
Filament Length 340 meters
Net Weight 1 KG

Storage Instruction

  • PREVENT : Do not store filament in humid and warm conditions, it will accelerate the polymer breakdown
  • PRESERVE : When not in use, store filament back to the package box with the desiccant until next use
  • PROTECT : Keep filament away from direct sunlight, UV radiations can degrade the filament
  • Keep filament in dry and cold conditions
  • Dehumidify the filament using dehydrator if it is soaked (brittle and snap easily)

Additional information

Weight 1350 g


There are no reviews yet.

Be the first to review “EUREKA3D Filament PLA+ 1KG 1.75mm (Fluorescent Yellow)”

Your email address will not be published. Required fields are marked *