Arduino Uno 9-in-1 Learning Shield
This is a 9-in-1 learning shield which has 9 different sensors with buttons and I2C and UART interface pins.
Out of stock
This is a 9-in-1 learning shield which has 9 different sensors with buttons and I2C and UART interface pins. An excellent shield consists of the most used devices for many projects, that you can use to learn how to read humidity and temperature, receive infrared signal from remote controller, read light intensity from the photoresistor (LDR) on the board, etc. so you can make great projects out of it.
It also comes with two LEDs that you can use as status indicators, RGB LED that can emit full range color (16,777,216 colors based on 8-bit PWM control for R, G and B respectively, although human eye cannot differentiate all the colors). Two push buttons are provided for learning inputs to trigger certain events.
- Suitable for Uno, Mega, Leonardo and other 5V Arduino’s using the Uno R3 pin layout
- Operating voltage : 5V
- Has several parts to learn the basics with Arduino
- Extension for I2C and UART (RX/TX) pins
|LED1||Arduino digital pin 13|
|LED2||Arduino digital pin 12|
|SW1||Arduino digital pin 2|
|SW2||Arduino digital pin 3|
|DHT11||Arduino digital pin 4|
|Active guzzer||Arduino digital pin 5|
|IR receiver||Arduino digital pin 6|
|RGB LED||Arduino digital pin 9 – 11|
|Potentiometer||Arduino analog pin 0|
|Photoresistor (LDR)||Arduino analog pin 1|
|LM35||Arduino analog pin 2|
|Dimensions||72 × 52 × 25 mm|